Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film

A study of the pyrolysis of an aqueous solution of manganese nitrate in the presence of silver compounds has been carried out. Thermal analysis showed that the MnO₂ formation temperature and the transformation temperature from MnO₂ to Mn₂O₃ shifted towards a lower temperature in the presence of silver acetate. A large particle-size and high crystallinity MnO₂ was formed; this may be a useful method of making an excellent tantalum capacitor with high capacitance.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.     

Boronic acid‐based thin films that show saccharide‐responsive multicolor changes

A novel saccharide sensor that displays a distinct color change resembling a “traffic signal” was developed. By copolymerizing boronic acid and amine monomers on a glass plate, a boronic acid‐containing thin film was obtained. Anionic blue and yellow dyes were adsorbed on the thin film, and the film was immersed in aqueous saccharide solutions containing a cationic red dye. With increase in the saccharide concentration in the solution, the thin film changes color from green to red via yellow. The observed distinct changes in color were attributed to a stepwise release and binding of dyes. The sensitivity of the saccharide sensor was dependent on the monomer composition of the thin film and increased with increasing the boronic acid content. The pH of the saccharide solution was another key factor affecting the sensing behavior, and glucose‐responsive color changes were significantly enhanced at pH 7.8. By optimizing these conditions, significant color changes in response to glucose were achieved. Saccharide selectivity was found to be in the following order: fructose > glucose > galactose = mannose > sucrose. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42679.     

Scaling prospect of optically differential reconfigurable gate array VLSIs

Dynamic reconfigurable devices present new computational paradigms because programmable devices’ activity and performance can be improved dramatically by increasing its reconfiguration frequency. Therefore, this paper presents designs of optically differential reconfigurable gate array (ODRGA) VLSIs using 0.18 μm and 0.35 μm CMOS process technologies. Although they are a type of programmable gate array, they can be reconfigured optically in nanoseconds. This paper also discusses future scaling prospects of ODRGA-VLSIs.     

Surface Waves on Superfluid <Superscript>4</Superscript>He Under Reduced Gravity

Superfluid ⁴He was produced on a small jet plane for the first time using a small GM-refrigerator to condense the liquid and a scroll pump to get the superfluid by evaporation. The surface wave on superfluid under 0.5g _E, 0.1g _E and 0.05g _E, together with 2g _E and 1g _E, was successfully examined by an optical method utilizing parabolic flight. Here, g _E is the gravitational constant on the ground. Assuming that only the fundamental mode was excited as determined by the sample cell width, the resonance peak in the frequency domain was well reproduced by the gravity wave with corresponding gravity constant.     

Wholly synthesised VAD single-mode fibre

The first trial on the fabrication of completely synthesised VAD single-mode fibre is reported. Successful formation of a large deposited cladding-to-core diameter ratio of 10 leads to redundancy of silica jacketing tubes.     

Characterization of polymer films using a slow positron beam

Polymer structures have been investigated using positron annihilation lifetime spectroscopy (PALS) with a slow positron beam as well as a conventional radioactive source (²²Na). The properties of the free volume holes near the polymer surface were studied as a function of the positron implantation energy. The longest lifetime was associated with ortho-positronium (o-Ps) annihilation in the free volume holes. In polytetrafluoroethylene film, the lifetime of o-Ps was observed to decrease with increasing positron implantation depth, and a significant change in the o-Ps lifetime was found at a short distance (about 10 nm) from the surface, while its intensity increased. This result implies that near the polymer surface the free volume holes become larger that in the bulk. The effect of temperature on the polymer sub-surface layers was also studied. For high molecular weight polystyrene, the glass transition temperature for the sub-surface was lower than that for the bulk and thermal expansion coefficient of the sub-surface layers was found to be larger than the bulk value. Electronic Publication     

Lipid analog with 2-nitrophenol trigger designed for liposome fusion at physiological pH

A novel lipid analog with two long alkyl (C₁₆) chains, an aspartate skeleton, a connecting alkyl (C₈) chain, and 2-nitrophenol trigger group is synthesized by an efficient synthetic route, which can induce liposome fusion at physiological pH.     

Three-dimensional shape recognition method using ultrasonics for manipulator control system

This article describes a three-dimensional shape recognition method that employs an ultrasonic distance sensor mounted on a manipulator, and its application to a manipulator control system. The principle of the method is to reconstruct an object surface numerically using both distance and orientation informations of an object. The method makes it possible to control the manipulator, to set the sensor in any position and orientation employing freedom of the manipulator, and to measure the object. The method is available for manipulator control because it can precisely assess the distance from the manipulator to the object, as well as reconstruct the object shape. Experimental results show that the newly developed method make object shape recognition easy and inexpensive. Application experiment proved that the method is effective for manipulator work due to its provision of distance information.     

Observation of the solid-state formation of a TTF–CA complex by terahertz spectroscopy

The solid-state synthesis of a tetrathiafulvalene–chloranil (TTF–CA) complex was demonstrated, and progress in the formation of the complex was monitored using a GaP Raman terahertz (THz) spectrometer. Clear transitions in the THz absorption spectra indicated that the mixture of TTF and CA became the black phase TTF–CA complex. The results of X-ray diffraction, Raman scattering, and FTIR spectra are presented as supporting evidence.